Huawei Y520-U22 MT6572 Firmware Flash File free100% Tested Download LDC waite

 

How To flash MediaTek (MTK) scatter file With SP flash tool

Step 1 : Install the drivers on the computer.

Step 2: Switch off the mobile.

Step 3: Extract the Stock ROM and SP Flash Tool folder. Where you want to save. Open the SP Tool and run Sptool.exe as the Administrator.

Step 4: Select the Scatter-Loading option. The tool asks you the location of the scatter file in the computer. It will found in the extracted Stock ROM folder. Go to the ROM folder. Click on the file “Android_scatter_emmc.txt” which is the stock Rom scatter file.

Step 5: Select the firmware upgrade from the drop-down menu. Click on Download. Connect the phone to the computer via USB cable.

Step 6: Select Download in the SP tool for download the ROM on Elephone G5.

Step 7: SP Tool auto-detect the mobile and the process will start. Finish the flashing process of Elephone G5.

Step 8: Now start downloading the Stock Rom in the mobile by flashing. A green ring will appear after the process complete. Disconnect the updated phone.

Caution:

– Don’t stop this process as it bricks the device. Make sure no power separation takes place.

-If Sp Flash tool is not noticed or detect the phone, then install vcom driver. Then Reconnect you switched off the phone with the computer.

-If the phone is not recognized again. Then try the Meta mode flashing process.

 

Read me:

 

• Take a back of everything if you are going to flash the above firmware on the smart phone device. Because it’s a chance to delete the personal data after flashing the stock firmware.

• To check the new firmware, you can go to the ‘’ settings -> About Phone ->Check Firmware’’. You can find the new destination of the firmware.

 

How to Hang On Logo Solved

Step 1: Make sure that the tablet is actually powered off.

Step 2: Now Press the power and the volume up buttons together until you see the startup logo on the screen.

Step 3: You can see the logo, release the buttons and allow the device to enter the system recovery mode.

Step 4: Next use Volume down button and to get the “factory reset” option when in recovery mode the “volume up” and “volume down” button.

Step 5: After you have selected the “factory reset” press the power button to select that option.

Step 6: And now press the power button to hard reset the phone.

How to White Screen & Black Screen Solved Flash File:

#At first download this software file.

#Then extract rar file.

#Now open the SP flash tool.

#After insert scatter file loading and top download.

#Plug in a USB cable.

#Wait all done work process.

#Unplug the USB cable.

#Now reboot your phone.

#Black or green screen is now fixed.